Graco Pump Repair Kit

Find Your Graco Pump Repair Kit by Sprayer Model

The table below covers the most common Graco sprayers and the Bedford replacement for each factory kit number. Sprayer generations matter — a 2014+ "II" series usually takes a different kit than the original — so if your model spans generations, open both product pages and check the Compatible Equipment list for your exact unit.

Don't see your sprayer? These are only the most common matches — the collection above covers hundreds more models, including older st and Classic generations and Graco-built Sherwin-Williams and ASM units. Use the Custom Lookup Tool or search by your Graco kit number.

Repack, or Full Rebuild?

A pump repair kit handles the most common wear: the throat and piston packings and seals that keep pressure in the pump. If your sprayer slowly loses pressure, won't hold prime, or weeps paint at the throat nut, a repack usually brings it back.

If the pump was run dry or the finish on the displacement rod is scored, new packings will wear out quickly against the damaged surface. In that case replace the worn hard parts at the same time — see piston rods, cylinders & sleeves — or pair your kit with individual sprayer repair parts like inlet valves and gaskets. For other sprayer brands, start at the main pump repair kits collection.

Why Contractors Choose Bedford Kits

• Significantly discounted vs. OEM prices
• Manufactured to OEM-equivalent dimensions and materials for proper fit
• One kit often services multiple Graco models
• Same-day shipping on most orders
• Trusted by contractors and service techs — Bedford has supplied spray equipment parts for over 59 years

Graco Pump Repair Kit FAQ

How do I know which pump repair kit fits my Graco sprayer?

Three ways: match your sprayer in the table above, search this site for the Graco kit number printed in your sprayer's manual, or use the Custom Lookup Tool. Every Bedford product page also lists the exact sprayer models that kit services, so you can confirm before ordering.

Are these genuine Graco kits?

No — Bedford kits are compatible replacements, not genuine Graco parts. Each kit is manufactured to fit the same pumps the corresponding Graco kit services, at a significantly lower price.

What are the signs my sprayer pump needs a repair kit?

The classic symptoms of worn packings: the sprayer loses pressure while spraying, cycles continuously without holding pressure, won't prime, spits or sputters at the gun, or leaks paint past the throat nut. Many contractors also repack seasonally as preventive maintenance rather than waiting for a failure mid-job.

Do you carry kits for older or discontinued Graco sprayers?

Yes — the collection includes kits for legacy generations like the st, st Pro, Classic, Ultra, and Ultimate Mx series that Graco no longer actively supports, which is often the most economical way to keep an older sprayer working.

Should I replace anything else while the pump is apart?

If you're already opening the pump, inspect the displacement rod and sleeve for scoring and check the inlet and outlet valves. Replacing marginal wear parts during a repack saves a second teardown later.

BEDFORD® and BEDFORD PRECISION PARTS™ are proprietary marks of Bedford Precision Parts, LLC ("Bedford"). All other listed marks are proprietary to their respective owners and are not affiliated with Bedford.